abe dooley
5-1600
NEED PICS FOR NEXT BUILD.
Posts: 63
|
Post by abe dooley on Aug 12, 2009 18:06:06 GMT -8
Anyone here ever drill a hole for detail wire or ignition wires and find out its too big or small? Then you have to fill it in with glue if its too big and wait for it to dry, or if its too small and you have to use a larger bit, but you can't just go one size up, you usually have to go 2 or 3 sizes up and find that you've just opened it up too much. Well, I got tired of this. I made my own wire/drill bit GAUGE. It measures 9/16" X 1-27/32" X .040" thick plastic sheet. Its that simple. I know that eventually it will get wore out and won't be accurate, but I made it so it was easy and cheap. Especially after looking at the metal one from Micro Mark and seeing that they wanted $20 for theirs! Heres a pic:
|
|
|
Post by coopdad on Aug 13, 2009 8:23:19 GMT -8
Neat idea. Sooooo simple I wonder why I did not think of it. And so what if it wears out... making another only takes a few minutes. Thanks! john
|
|
|
Post by wtsf150 on Aug 13, 2009 16:44:36 GMT -8
Cool idea Abe Thanks, Willie
|
|